Category Archives: Floor installation
Natura Kerry Oak 15mm engineered flooring replaced in an office. Rothbone Place, W1T, 70sqm. Solid Oak beading and door thresholds.
Few photos below of our recent herringbone parquet fitting job in Clapton E5. Reclaimed Afrormosia block, after it was fitted we’ve sanded it down and sealed with three coats of Junckers Commercial lacquer.
We have a few photos of herringbone reclaimed parquet floor fitting in progress. This beech block is reclaimed which came from s school in Somerset. The block was actually made in Yugoslavia, when it was a single country, therefore the … Continue reading
In this project we’ve fitted brand new Solid Oak flooring in the whole house in Newham, E6 in London. The doors in the house had to be taken off and trimmed, downstairs the floor was glued onto the subfloor.
During this wooden floor fitting project we worked on 27m2 of flooring. Boards and stairs were repaired prior to installation. Then we fitted 9mm plywood to even out the subfloor and then fitted engineered flooring on top (tongue and groove). … Continue reading
We installed flooring in hallway and kitchen on this project in Anerley SE20. Plywood was installed prior to laying the flooring. Also Ogee white skirting was installed as you can see from photos. Flooring also installed to 3 stairs which … Continue reading
Please find photos below of our recent project in Staines, London, TW18. The floors have been laminated and skirting installed in this property. Old skirting removed in the process. The wall was not plastered after the old skirting has been … Continue reading
Solid Herringbone wood floor installation, sanding and varnishing.