Category Archives: Floor sanding
Pine floor boards stained in Hither Green, SE13 in May 2016. Stain used – Golden oak light fast stain by Mylands The floor is then sealed with Junckers lacquer.
On this job the reclaimed parquet from Parquet Parquet has been cleaned on all 4 sides. Parquet is then laid in herringbone pattern, sanded, gap filled and lacquered (Junckers Strong).
Engineered floor renovated. In the pictures you see after it has been varnished.
These floors have been repaired, sanded, gaps filled with slivers and oiled with Osmo oil
Beech strip floors sanded, planks replaced, varnished
Work has been carried out in Herne Hill, Norwood, SE24
Over the Christmas period we’ve carried out a floor renovation project for the Lima Restaurant in Central London. The floors were restored both on the ground floor and in the basement. We’ve also restored and relacquered a bar top downstairs. … Continue reading
We have a few photos of herringbone reclaimed parquet floor fitting in progress. This beech block is reclaimed which came from s school in Somerset. The block was actually made in Yugoslavia, when it was a single country, therefore the … Continue reading
We’ve fitted 45 sqm of reclaimed herringbone parquet flooring on plywood in a residential house in Tooting, SW17. Photos below. A difficulty we had with this job was that the parquet block was not an easy job to clean as … Continue reading
During this project in Hackney we had to sand engineered flooring which had about 5mm solid wood top layer and then seal the floor with hard wax oil. We had to be very careful not to sand off the top coat … Continue reading
Below are a few photos made during our floor renovation job in St John’s Park in Central London, Westminster, SW1. This was a solid wood floor that needed sanding down, buffing, staining and sealing with a strong, hard wearing lacquer. This … Continue reading
In this project we had 90 sqm of old victorian pine boards to sand, gap fill and seal with hard wearing varnish. 3 rooms upstairs, landing, 15 steps, dining and living room downstairs and hallway. The floor boards had many … Continue reading
In this project we’ve fitted reclaimed herringbone Sapele parquet. All the blocks were cleaned individually. Before the flooring was installed, the areas were levelled with levelling screed. Floor sealed with 3 coats of varnish. The project was carried out in … Continue reading
We’ve stripped the old white paint of these pine floor boards. Gap filled the floors with filler. The project was carried out at residential premises in Clapham, South London.The rooms now have warm, homely feel. Floor sanding gives the floors … Continue reading
Here is a video of floor sanding in action in an office in Brixton, oval area, SW9. This oak parquet is a hard wood and needed more sanding, going through different sanding grits. We floor sand for a price of … Continue reading
In this post we have a few photos of the work in progress in an office in Brixton (SW9). Oak parquet floors are sanded with our Frank Cobra sander and smaller sanders to do the edging. Because the oak flooring … Continue reading
Here we’ve made 3 videos which show how the floor is sanded, buffed and gap filled. The floor is firstly sanded with different sanding grits to even out the floor and strip the old lacquer. After the floor is even … Continue reading
Below are 3 photos we took after the parquet floor has been sanded and varnished with Junckers Strong varnish. For this project in North Kensington the floor didn’t need to be stained because its natural colour looks great as it … Continue reading
Solid Herringbone wood floor installation, sanding and varnishing.
Floors in Sydenham also varnished with Morrells spirit based stain.
Floor sanding, gap filling with pine slivers, floor oiling with Osmo Polyx Oil in Brixton.
Junckers clear Rustic Oil used for these floors in Chiswick.
Osmo oil used for this project in Kingston. Check out the before and after photos below.
Gaps filled, floors repaired, floor sanded, varnished in Honor Oak Park.
Floor sanding in East Sheen / Mortlake. All gaps filled with reclaimed pine wedges. Oak strip floor, pine floors sanding in progress.
Floor sanding job in Honor Oak
Below are before and after pictures. Work in progress, floors have been sanded, gaps filled. Floors in Holborn will be finished with Junkers lacquer.
We’ve sanded down, repaired, gap filled and varnished these floors in Nunhead for our customer. You can really see the difference. The floors are Victorian floor boards and still look as new in places. Although due to nails getting rusty … Continue reading
Parquet floor sanding and varnishing in Wembley. Photo of the work in progress.
Floors sanded down and varnished in Great Bookham. Before photos
Parquet sanding, varnishing and laminate fitting project in Fulham. Before photo:
Floors sanded, gaps filled with reclaimed wooden strips in Guildford.