fbpx

Floor sanding

Category Archives: Floor sanding

Floor sanding and finishing in Hackney, E8

During this project in Hackney we had to sand engineered flooring which had about 5mm solid wood top layer and then seal the floor with hard wax oil. We had to be very careful not to sand off the top coat of the flooring ensuring the floor was left as smooth and flat as possible. Our floor sanding prices start at £12.00 per sqm Floor oiling at £5.00 per sqm Floor sanding in Hackney Engineered flooring sanding Wood floor oiling Floors oiled

Floor sanding and renovation job in Westminster, SW1

Below are a few photos made during our floor renovation job in St John's Park in Central London, Westminster, SW1. This was a solid wood floor that needed sanding down, buffing, staining and sealing with a strong, hard wearing lacquer. This was a successful project and our customer was left happy with the result. We sand wooden flooring from £12.00 per sqm Sealing with a lacquer for £4.00 per sqm Floor sanding in Westminster Floor sanding in progress London, SW1 Stain just applied, still drying Solid Oak floors sealed in St John's Park, SW1

Floor sanding, gap filling with pine slivers in Charlton, SE7

In this project we had 90 sqm of old victorian pine boards to sand, gap fill and seal with hard wearing varnish. 3 rooms upstairs, landing, 15 steps, dining and living room downstairs and hallway. The floor boards had many gaps between them which we filled with pine slivers, the floors were finished with Junckers Strong lacquer. Floors before The floor before Flooring before renovation Floors sanded Work in progress Floor sanding Charlton Floorboards sanded and gap filled Landing sanded and gap filled with pine slivers

Reclaimed Herringbone Sapele parquet fitting and sanding in London Bridge, SE1

In this project we've fitted reclaimed herringbone Sapele parquet. All the blocks were cleaned individually. Before the flooring was installed, the areas were levelled with levelling screed. Floor sealed with 3 coats of varnish. The project was carried out in London Bridge area in Southwark, SE1. Press to enlarge Floor fitting in progress Parquet fitting in hallway Parquet fitting in kitchen Hallway After floors are sanded and sealed Kitchen floor Herringbone Sapele parquet installed Sapele wood herringbone parquet Sapele parquet blocks Sapele parquet sanded

Floor sanding project in Brixton SW9

In this post we have a few photos of the work in progress in an office in Brixton (SW9). Oak parquet floors are sanded with our Frank Cobra sander and smaller sanders to do the edging. Because the oak flooring is hardwood we need to take extra care and make sure we go through the grips from lowest to highest to leave the finished floor 100% smooth. After the floor is sanded we buff the floor and then apply 3 coats of water based lacquer. Floor sanding in Oval Floor renovation in progress Parquet sanding service Oak floor sanding project

Wood floor sanding, floor buffing and gap filling videos

Here we've made 3 videos which show how the floor is sanded, buffed and gap filled. The floor is firstly sanded with different sanding grits to even out the floor and strip the old lacquer. After the floor is even and stripped to bare wood, we gap fill between the floor boards with a mix of saw dust and filler (this is not necessary but an option). After couple of ours the filler is dry and the floor can be sanded one more time. One of the finishing stages in preparing the floor for varnishing or oiling is buffing the floor using a wood floor buffer to make the floor as smooth and even as it can be. The floor buffing machine can even out any small inconsistencies left by a belt and edger sanders. Finally the floor is hoovered to get rid off any dust and the finish is applied. We sand and buff the floor for £12.00 per square metre, gap fill the floor for £5.00 per square metre.