Oak parquet laid and oiled in Battersea, SW11
Category Archives: floor buffing
Engineered floor sanding and varnishing in gym, central London
Engineered floor renovated. In the pictures you see after it has been varnished.
Floor sanding and finishing in Hackney, E8
During this project in Hackney we had to sand engineered flooring which had about 5mm solid wood top layer and then seal the floor with hard wax oil. We had to be very careful not to sand off the top coat of the flooring ensuring the floor was left as smooth and flat as possible.
Our floor sanding prices start at £12.00 per sqm
Floor oiling at £5.00 per sqm
Floor sanding and renovation job in Westminster, SW1
Below are a few photos made during our floor renovation job in St John's Park in Central London, Westminster, SW1. This was a solid wood floor that needed sanding down, buffing, staining and sealing with a strong, hard wearing lacquer.
This was a successful project and our customer was left happy with the result.
We sand wooden flooring from £12.00 per sqm
Sealing with a lacquer for £4.00 per sqm
Reclaimed Herringbone Sapele parquet fitting and sanding in London Bridge, SE1
In this project we've fitted reclaimed herringbone Sapele parquet. All the blocks were cleaned individually. Before the flooring was installed, the areas were levelled with levelling screed. Floor sealed with 3 coats of varnish. The project was carried out in London Bridge area in Southwark, SE1.
Press to enlarge
Recent floor renovation project in Clapham SW8
We've stripped the old white paint of these pine floor boards. Gap filled the floors with filler. The project was carried out at residential premises in Clapham, South London.
The rooms now have warm, homely feel. Floor sanding gives the floors new life for many years to come.
We sand the floors for £12.00 per sqm.
Wood floor sanding, floor buffing and gap filling videos
Here we've made 3 videos which show how the floor is sanded, buffed and gap filled. The floor is firstly sanded with different sanding grits to even out the floor and strip the old lacquer. After the floor is even and stripped to bare wood, we gap fill between the floor boards with a mix of saw dust and filler (this is not necessary but an option). After couple of ours the filler is dry and the floor can be sanded one more time. One of the finishing stages in preparing the floor for varnishing or oiling is buffing the floor using a wood floor buffer to make the floor as smooth and even as it can be. The floor buffing machine can even out any small inconsistencies left by a belt and edger sanders. Finally the floor is hoovered to get rid off any dust and the finish is applied.
We sand and buff the floor for £12.00 per square metre, gap fill the floor for £5.00 per square metre.
