fbpx

Floor varnishing

Category Archives: Floor varnishing

Pine floor boards restoration project in Plumstead, SE18 – London

  • Property Type: Victorian terrace 3-storey house
  • Service: Floor restoration service
  • Area: 60m² / 4 rooms + 2 hallways
  • Duration: 6 days

The Challenge

Extensive repairs needed to be done before floor could be sanded and refinished. Many boards taken up and replaced with reclaimed boards before being sanded down and finished with coats of commercial lacquer.  

Work Completed

  • Floor boards repaired and replaced
  • Wood floor sanded with a belt sander and edger sanders
  • Floor finished with a primer coat and 2 coats of commercial lacquer
What a transformation. This was a bit of a tough job, labour intensive and took a bit of time, but we got there at the end.
Happy customer can now move into their house.

Floor renovation project at the Lima restaurant, W1T, Fitzrovia

Over the Christmas period we've carried out a floor renovation project for the Lima Restaurant in Central London. The floors were restored both on the ground floor and in the basement. We've also restored and relacquered a bar top downstairs. The floors were firstly sanded and then stained using a Mylands stain. Then we finished off with 3 coats of hard wearing polyurethane lacquer. Lima Restaurant from outsideFloor renovation project at the Lima Rstaurant Floors sanded and stained Floors sanded and stainedFloors stained English Oak and lacquered Floors stained English Oak and lacquered

Floor sanding and renovation job in Westminster, SW1

Below are a few photos made during our floor renovation job in St John's Park in Central London, Westminster, SW1. This was a solid wood floor that needed sanding down, buffing, staining and sealing with a strong, hard wearing lacquer. This was a successful project and our customer was left happy with the result. We sand wooden flooring from £12.00 per sqm Sealing with a lacquer for £4.00 per sqm Floor sanding in Westminster Floor sanding in progress London, SW1 Stain just applied, still drying Solid Oak floors sealed in St John's Park, SW1

Reclaimed Herringbone Sapele parquet fitting and sanding in London Bridge, SE1

In this project we've fitted reclaimed herringbone Sapele parquet. All the blocks were cleaned individually. Before the flooring was installed, the areas were levelled with levelling screed. Floor sealed with 3 coats of varnish. The project was carried out in London Bridge area in Southwark, SE1. Press to enlarge Floor fitting in progress Parquet fitting in hallway Parquet fitting in kitchen Hallway After floors are sanded and sealed Kitchen floor Herringbone Sapele parquet installed Sapele wood herringbone parquet Sapele parquet blocks Sapele parquet sanded